2.4Ghz Receivers

VC-1-RC
Our entry level model capable of receiving a single video and stereo signal. This unit should be used only with our transmitter model VC-1-TM. Supplied complete with regulated UK or 2 pin Euro power supply unit and all RCA/Scart leads as standard. This receiver may be connected directly to a TV/monitor or video recorder via the accessories supplied.

Click to enlarge

VC-1-M-RC
A desktop 4 channel receiver with the added bonus of both video and stereo reception. Up to 4 channels may be received. Manual channel switching operation. This model may be used with any 4 channel transmitter model but if full stereo reception is required please use tranmitter model VC-1-M-TM. Supplied complete with regulated UK or 2 pin Euro power supply unit and all RCA/Scart leads as standard. This receiver may be connected directly to a TV/monitor or video recorder via the accessories supplied.

Click to enlarge

VC-2-AS-RC3
Do you require full video and stereo reception for up to 4 channels but also require automatic 3 second channel switching option? If so, this is the model for you! Supplied complete with regulated UK or 2 pin Euro power supply unit and all RCA/Scart leads as standard. This receiver may be connected directly to a TV/monitor or video recorder via the accessories supplied.

Click to enlarge

VCM-2-A-RC
Our new upright receiver is perfectly matched with any of our standard or high power mini transmitters or mini cam transmitters. It can receive up to 4 channels of video and mono audio. It also has the added feature of being set to a single channel or 3 second channel switching format. Supplied complete with regulated UK or 2 pin Euro power supply unit and all RCA/Scart leads as standard. This receiver may be connected directly to a TV/monitor or video recorder via the accessories supplied.

Click to enlarge

VC-2-8CH-RC
Our 8 channel mini receiver should only be used in conjunction with transmitter models VC-2-8CH-TM, VC-2-8CH-TM-HI or VC-1-MS-TM-8 CH-2W. This upright unit is capable of receiving up to 8 channels of video. Once again, the receiver may be set to a specific channel or can be used with 3 second channel autoswitch mode. Supplied complete with regulated UK or 2 pin Euro power supply unit and all RCA/Scart leads as standard. This receiver may be connected directly to a TV/monitor or video recorder via the accessories supplied.

Click to enlarge

VC-1-N-Y
Do you live or work in a region where regulations prohibit Hi power transmission? Here is a effective and totally solution to the problem. We are pleased ti supply a package comprising a single channel receiver with Video and stereo capability. However, this receiver is also supplied with a 43 inch/107cm lead ending in a 50ohm “N” connector output. In addition, we also supply a dedicated 2.4GHz yagi antenna, complete with wall fixings. When the receiver and the Yagi are connected via a 50ohm coaxial cable (not supplied) you receive an enhanced and totally legal signal boost. Supplied complete with regulated UK or 2 pin Euro power supply unit and all RCA/Scart leads as standard. This receiver may be connect directly to a TV/monitor or video recorder via the accessories supplied.

Click to enlarge

VC-1-MN-Y
A 4 channel receiver with N connector/Yagi package. Receive up to 4 channels of Video and stereo signals. Supplied complete with regulated UK or 2 pin Euro power supply unit and all RCA/Scart leads as standard. This receiver may be connect directly to a TV/monitor or video recorder via the accessories supplied.

Click to enlarge

VCM-2-AS-RC3-USB
Flexibility and a very low cost way of receiving video and audio signals on your PC or laptop. We have put together a package of a mini upright receiver, a PAL USB adaptor and appropriate software for Windows 95,98, ME or 2000 operating system. Watch live images in your PC or laptop and are the click of a button, take a snapshot or video of the images you are watching.The snapshot or video can be saved to your hard drive for replaying later. You can watch a single channel or set the receiver to channel switch mode with 3 second interval between channels. The USB adaptor (Version 1.1) is powered by the PC and connects directly to the receiver. The software installation package is via a floppy desk, is extremely small in size and only takes a couple of minutes to install. The receiver takes its power from the PC, via the USB adaptor. Supplied with al leads. Note, NTSC USB adaptors available on special order.

Click to enlarge

VCM-2-AS-RC3-USBX
This is a similar package to our other system but the software supplied on floppy is compatible with Windows XP home or Pro. Note, NTSC USB adaptors available on special order.

Click to enlarge